|
|
Modification of clamping part of the test machine RUMUL Cracktronic 160
Beran, Pavel ; Hutař, Pavel (referee) ; Mazal, Pavel (advisor)
This diploma thesis deals with the structural design of the chucking jaws for RUMUL Cracktronic 160 testing machine. This apparatus is used in the fatigue laboratory of Institute of Machine Design FME BUT. Simplification, speed improvement and better test sample griping are expected gains of the new clamping system. Solidworks system is used to create 3D model of the jaws. Stress analysis is created by Finite element method in ANSYS Workbench software.
|
|
|
Determination of the mechanical properties of materials used for 3D printing
Černý, Martin ; Sliwková, Petra (referee) ; Sedlák, Josef (advisor)
The thesis deals with the determination of mechanical properties of materials used for 3D printing (ABS, nylon and PLA). Standardized samples produced using a 3D printer using the Fused Deposition Modeling method were subsequently used for mechanical testing. The work is also extended to determine the mechanical properties of samples made by Soft Tooling. For the production of Soft Tooling samples, polyurethane resins SG 2000 and SG 145 were used. Individual materials were analyzed by mechanical tests (tensile test and hardness test). Surface integrity parameters have also been determined for 3D-printed materials. Parameters were selected from the individual tests (tensile strength, modulus of elasticity) ductility and hardness), which were subsequently statistically processed. The work is concluded by evaluating the results obtained, which were compared with the values given in material sheets.
|
|
|
New directions for waterproofing of underground transport
Čech, Tomáš ; Čížek, Luboš (referee) ; Šťastník, Stanislav (advisor)
This diploma thesis focuses on the implementation of waterproofing of underground constructions using an LLDPE membrane hinged on anchors. In the future, this method will replace the commonly used waterproofing system in Scandinavia with extruded polyethylene foam. This method of tunnel construction and waterproofing is compared with the NRTM method, often used in Central Europe. The thesis describes the installation of a waterproofing system, especially materials, accessories, welding devices and auxiliary installation equipment. The main focus of the thesis is to verify the reliability of the individual types of welds and to assess the waterproofing system in terms of implementation and environmental demands.
|
|
|
Multiparametric diagnostics of high-speed machine
Bowyer, Matouš ; Harčarík, Matej (referee) ; Jankových, Róbert (advisor)
The goal of the thesis was applying multiparametric diagnostics to determine the state and wear of a high-speed milling machine. In the theoretical section, selected areas of multiparametric diagnostics have been described as well as a significant focus on vibrodiagnostics. The chosen methods for the practical section were incorporated into the group “metrological diagnostics”. Several different types of measurements have been performed on the designed test piece. The measurements were analyzed and lead to these specific results: a drawing of the test piece, a structured methodology for evaluating the test piece, recommendations for diagnostics of the specific machine, and proposals for the future development of the field of metrological diagnostics.
|
|
|
Měření tvrdosti plastů
Brunclík, Štěpán
This diploma thesis deals with the hardness measurement of plastics. Thesis is divided into four main parts. The first part deals with an overview of existing research findings in the field of hardness measurement of plastics. This part of the work is devoted to the description of principles and procedures, used indenters, sizes of test loads and evaluation of individual test methods. The second part deals with the measurement of the hardness of the test specimens for the selected plastic materials and the comparison with the hardness values declared by the manufacturer. The third part is focused on the suitability of the used methods for measuring the hardness of selected materials. The last part deals with the possible differences in the measured and manufacturer declared values of hardness of plastic materials.
|
|
|
Determination of the mechanical properties of materials used for 3D printing
Černý, Martin ; Sliwková, Petra (referee) ; Sedlák, Josef (advisor)
The thesis deals with the determination of mechanical properties of materials used for 3D printing (ABS, nylon and PLA). Standardized samples produced using a 3D printer using the Fused Deposition Modeling method were subsequently used for mechanical testing. The work is also extended to determine the mechanical properties of samples made by Soft Tooling. For the production of Soft Tooling samples, polyurethane resins SG 2000 and SG 145 were used. Individual materials were analyzed by mechanical tests (tensile test and hardness test). Surface integrity parameters have also been determined for 3D-printed materials. Parameters were selected from the individual tests (tensile strength, modulus of elasticity) ductility and hardness), which were subsequently statistically processed. The work is concluded by evaluating the results obtained, which were compared with the values given in material sheets.
|
|
|
Multiparametric diagnostics of high-speed machine
Bowyer, Matouš ; Harčarík, Matej (referee) ; Jankových, Róbert (advisor)
The goal of the thesis was applying multiparametric diagnostics to determine the state and wear of a high-speed milling machine. In the theoretical section, selected areas of multiparametric diagnostics have been described as well as a significant focus on vibrodiagnostics. The chosen methods for the practical section were incorporated into the group “metrological diagnostics”. Several different types of measurements have been performed on the designed test piece. The measurements were analyzed and lead to these specific results: a drawing of the test piece, a structured methodology for evaluating the test piece, recommendations for diagnostics of the specific machine, and proposals for the future development of the field of metrological diagnostics.
|
|
|
New directions for waterproofing of underground transport
Čech, Tomáš ; Čížek, Luboš (referee) ; Šťastník, Stanislav (advisor)
This diploma thesis focuses on the implementation of waterproofing of underground constructions using an LLDPE membrane hinged on anchors. In the future, this method will replace the commonly used waterproofing system in Scandinavia with extruded polyethylene foam. This method of tunnel construction and waterproofing is compared with the NRTM method, often used in Central Europe. The thesis describes the installation of a waterproofing system, especially materials, accessories, welding devices and auxiliary installation equipment. The main focus of the thesis is to verify the reliability of the individual types of welds and to assess the waterproofing system in terms of implementation and environmental demands.
|
|
|
New directions for waterproofing of underground transport
Čech, Tomáš ; Vaněrek, Jan (referee) ; Šťastník, Stanislav (advisor)
This diploma thesis focuses on the implementation of waterproofing of underground constructions using an LLDPE membrane hinged on anchors. In the future, this method will replace the commonly used waterproofing system in Scandinavia with extruded polyethylene foam. This method of tunnel construction and waterproofing is compared with the NRTM method, often used in Central Europe. The thesis describes the installation of a waterproofing system, especially materials, accessories, welding devices and auxiliary installation equipment. The main focus of the thesis is to verify the reliability of the individual types of welds and to assess the waterproofing system in terms of implementation and environmental demands.
|
|
|
Modification of clamping part of the test machine RUMUL Cracktronic 160
Beran, Pavel ; Hutař, Pavel (referee) ; Mazal, Pavel (advisor)
This diploma thesis deals with the structural design of the chucking jaws for RUMUL Cracktronic 160 testing machine. This apparatus is used in the fatigue laboratory of Institute of Machine Design FME BUT. Simplification, speed improvement and better test sample griping are expected gains of the new clamping system. Solidworks system is used to create 3D model of the jaws. Stress analysis is created by Finite element method in ANSYS Workbench software.
|
guest ::
